Siemens SINUMERIK ONE MCP 2400.c - Operator Control and Display Elements; Front Side

Operator control and display elements
4
4.1 Front side
Overview


① Emergency stop button
② Keypad 1 (operating mode block)
③ Keypad 2 (customer keys)
④ Keypad 3 (customer keys)
⑤ Keypad 4 (axis block)
⑥ Powerride 2 (spindle) + keypad 4.2
⑦ Powerride 1 (feed) + keypad 4.1
⑧ 4x mounting space for 22.5 mm elements with slide-in labels
⑨ 4x mounting space for 22.5 mm elements with slide-in labels
⑩ Key-operated authorization switch
⑪ 2x mounting space for 22.5 mm elements
Figure 4-1 Position of operator controls on the MCP 2400.c
Labeling of the keys
The keys are designed with replaceable caps for machine-speci󹪝c adaptations. The key caps can
be freely inscribed using a laser. Alternatively, you can use transparent key caps and insert labels.
ONE MCP Part 2: MCP 2400.c
Equipment Manual, 07/2020, A5E50324716B AA 17