4.2 Rear side
① Protective conductor connection
② Power supply interface X10
③ Switch S2
④ Ethernet interfaces X20 port 1/ port 2
⑤ Handwheel connections X60/ X61
⑥ Emergency stop
⑦ 2x mounting space for 22.5 mm elements
⑧ 4x mounting space for 22.5 mm elements with slide-in labels
⑨ Interface of the customer-specic inputs/outputs X516
⑩ Interface of the customer-specic inputs/outputs X515
⑪ 4x mounting space for 22.5 mm elements with slide-in labels
Figure 4-2 Rear view of the MCP 2400.c
Handwheel connecting cable
The handwheel connecting cable is not included in the scope of delivery. You will nd the article
numbers in Chapter "Spare parts/accessories".
Operator control and display elements
4.2 Rear side
ONE MCP Part 2: MCP 2400.c
18 Equipment Manual, 07/2020, A5E50324716B AA
To Next Page
Loading...
