To Next PageTo Next Page
Need help?Do you have a question about the Siemens SIRIUS 3RW40 24 Series and is the answer not in the manual?
General| Number of poles | 3 |
|---|---|
| Soft starter type | Solid-state |
| Integrated bypass contact system | Yes |
| Insulation voltage rated value | 690 V |
| Adjustable motor current | Yes |
| Type of voltage of the control supply voltage | AC/DC |
| Relative negative tolerance of the control supply voltage at AC at 50 Hz | -15 % |
| Relative negative tolerance of the control supply voltage at AC at 60 Hz | -15 % |
| Number of CO contacts for signaling | 0 |
| Installation altitude at height above sea level maximum | 2000 m |
| Height | 170 mm |
| Degree of protection | IP20 |
| Control voltage | 24 V DC |
| Product brand name | Siemens |
| Product function | Overload protection |
| Reference identifier acc. to DIN EN 81346-2 | K |
| Reference identifier acc. to DIN EN 61346-2 | K |
| Operating frequency rated value | 50 ... 60 Hz |
| Relative positive tolerance of the control supply voltage at AC at 50 Hz | 10 % |
| Relative positive tolerance of the control supply voltage at AC at 60 Hz | 10 % |
| Ambient temperature during operation | -20°C to +60°C |
Warnings regarding hazardous voltage, electrical shock, and component reliability during operation.
Specifies required clearances for ventilation around the soft starter unit.
Table of permitted current limits based on CLASS settings at 40 °C.
Step-by-step instructions for programming the ON/RUN output function.
Guides for wiring, parameter setup, and resolving issues based on motor behavior.
Explanation of LED displays for device status, motor protection, and errors.
