Siemens SIRIUS 3RW44 - Page 23

Getting Started
5.3 CFC
SIRIUS Soft Starter 3RW44 PCS 7 Library V8.2
Getting Started, 07/2016, A5E36563533002A/RS-AA/001
23
SSMeas and SSStat
If you want to use measurement and/or statistic values (
SSMeas
,
SSStat
) for the Soft Starter
device, you need to switch to sheet view 2 in the CFC plan. There you will find the additional
blocks for the mentioned functions.
Repeat the
Interconnection to Address
steps from above for this sheet.
Note
If you do not want to use the additional functions, you are free to delete the function blocks in
question or all blocks in sheet 2.
Result:
Basic block set up is now complete.
Generate module drivers
1. Go to
Chart > Compile > Chart as Program
or hit
Ctrl+B
or click in the toolbar. The
Compile dialog opens.
2. Ensure that the option
Generate module drivers
is checked in.
3. Confirm dialog with the
OK
-Button. After compilation has finished,
Logs
dialog will be
displayed.
4. Confirm this dialog by the
Close
button.
5. Back in the chart view, hit
F5
. The view will be updated and you will see all textual
interconnections replaced by the according block interconnection.