Siemens SIRIUS 3RW44 - 1 Preface

SIRIUS Soft Starter 3RW44 PCS 7 Library V8.2
Getting Started, 07/2016, A5E36563533002A/RS-AA/001
7
Preface
1
Brief description
The Getting Started of the PCS 7 library for SIRIUS Soft Starter uses a simple example
project to show you the basic procedures:
● Basic configuration steps
● Handling and monitoring different signal blocks
● Parameterization
This Getting Started manual is intended to be an introduction and largely dispenses with
detailed information and background information.
Requirements
Basic knowledge of creating a PCS 7 project is necessary. You will find information about
this in the Process Control System PCS 7; Getting Started (V8.0 or higher with APL)
documentation on the Internet
(https://support.industry.siemens.com/cs/document/109485954
).
Conventions
This documentation contains designations of the software interface elements. If you have
installed a multi-language package for the operating system, some of the designations will
be displayed in the base language of the operating system after a language switch and will,
therefore, differ from the designations used in this documentation.