Technical data
6.2 Output
SITOP PSU100S
Operating Instructions, 02.2013, C98130-A7589-A1-3-7629
43
6EP1332-2BA20 6EP1333-2BA20 6EP1334-2BA20 6EP1336-2BA10
Output characteristic see diagram, output
characteristic for
6EP1332-2BA20
(Page 45)
see diagram, output
characteristic for
6EP1333-2BA20
(Page 45)
see diagram, output
characteristic for
6EP1334-2BA20
(Page 45)
see diagram, output
characteristic for
6EP1336-2BA20
(Page 46)
Capacitive load, max. 2 mF/A
6EP1322-2BA00 6EP1323-2BA00
Output Regulated, isolated DC voltage
Rated voltage value Ua rated
DC
12 V
Total tolerance, static ± 3 % 3 %
Static line regulation, approx. ± 0,1 % 0,1 %
Static load regulation, approx. ± 1 % 1 %
Residual ripple
Peak-peak, max.
150 mV 150 mV
Spikes peak-peak, max.
(bandwidth, 200 MHz)
240 mV 240 mV
Adjustment range 11.5...15.5 V
Product function / output voltage
can be adjusted
Yes
Output voltage setting Using a potentiometer
Status display LED green for 12 V O.K.
Signaling Relay contact (NO contact, rating 60 V DC /0.3 A) for 12 V O.K.
Response when switching on/off Overshoot of Ua<360 mV
Starting delay, max. 300 ms 300 ms
Start delay, typ. 180 ms 170 ms
Voltage rise
120 V / 230 V AC max.
100 ms 100 ms
Voltage rise
120 V / 230 V AC typ.
10 ms 10 ms
Rated current Ia rated 7 A 14 A
Current range
Remark
0...7 A
+55...+70 °C derating:
5 % Ia rated/K
0...14 A
+55...+70 °C derating:
5 % Ia rated/K
Output active power / typical 84 W 168 W
Overload capability (Extra
Power)
10.5 A for 5 s/min 21 A for 5 s/min
Short-time overload current / for
a short circuit when powering up
/ typical
26 A 48 A
To Next Page
Loading...
