Siemens SITOP series - Page 40

Technical data
6.2 Output
SITOP modular 1ph/2ph
40 Operating Instructions, 06.2014, C98130-A7548-A1-3-7629
6EP1333-3BA10
(24 V/5 A)
6EP1334-3BA10
(24 V/10 A)
6EP1336-3BA00
(24 V/20 A)
6EP1337-3BA00
(24 V/40 A)
Constant overload current for a
short circuit when powering up,
typical
6 A 12 A 23 A 46 A
Short-time overload current for
a short circuit during operation,
typical
15 A 30 A 60 A 120 A
Duration of the overcurrent
overload capability for a short
circuit during operation
• Remark
25 ms
Every 1 min
25 ms
Every 1 min
25 ms
Every 1 min
25 ms
Every 1 min
Can be connected in parallel to
increase the power rating
• Remark
Yes
Switchable characteristic curve with switch A (see Status displays
and signaling (Page 13))
Number of devices that can be
connected in parallel to
increase the power rating,
quantity
2
Output characteristic See Figure 6-3
6EP1333-3BA10
single operation
output characteristic
(Page 41)
See Figure 6-4
6EP1334-3BA10
single operation
output characteristic
(Page 41)
See Figure 6-5
6EP1336-3BA00
single operation
output characteristic
(Page 41)
See Figure 6-6
6EP1337-3BA00
single operation
output characteristic
(Page 42)
Figure 6-2 Startup delay/voltage rise