Siemens SITOP User Manual

Overview
Selectivity modules
4 Manual, 01.2017, C98130-A7579-A1-2-7629
● Evaluation using free-of-charge SIMATIC S7 function blocks (S7-300/400/1200/1500) for
modules with single channel signal
● It can be selected that the load branches are sequentially switched on to reduce the total
inrush current
● Versions for limited output power ratings according to NEC Class 2 (maximum, 100 VA).
Ordering data
The following device options are available:
Selectivity modules
Type
Order number
SITOP select
24 V DC input
Number of outputs: 4
Setting range of the response threshold: 2 - 10 A with group signal contact
6EP1961-2BA00
SITOP PSE200U
24 V DC input
Number of outputs: 4
Setting range of the response threshold: 0.5 - 3 A with group signal contact
6EP1961-2BA11
SITOP PSE200U
24 V DC input
Number of outputs: 4
Setting range of the response threshold: 3 - 10 A with group signal contact
6EP1961-2BA21
SITOP PSE200U
24 V DC input
Number of outputs: 4
Setting range of the response threshold: 0.5 - 3 A with single channel signal
6EP1961-2BA31
SITOP PSE200U
24 V DC input
Number of outputs: 4
Setting range of the response threshold: 3 - 10 A with single channel signal
6EP1961-2BA41
SITOP PSE200U
24 V DC input
Number of outputs: 4
Setting range of the response threshold: 0.5 - 3 A with group signal contact NEC Class 2
6EP1961-2BA51
SITOP PSE200U
24 V DC input
Number of outputs: 4
Setting range of the response threshold: 0.5 - 3 A with single channel signal NEC Class 2
6EP1961-2BA61

Siemens SITOP Specifications

General

Brand	Siemens
Model	SITOP
Category	Power Supply
Language	English