Selectivity modules
Manual, 01.2017, C98130-A7579-A1-2-7629
43
Hazard due to electric shock
Before installation or maintenance work can begin, the system's main switch must be
switched off and measures taken to prevent it being switched on again. If this instruction is
not observed, touching live parts can result in death or serious injury.
The device is only suitable for operation with
(safety extra low voltage). If
this device is connected to line supplies with higher voltage levels this can result in death or
serious injury as well as extensive material damage.
Only appropriately qualified personnel may work on or in the vicinity of this equipment.
Perfect, safe, and reliable operation of this equipment is dependent on proper
transportation, storage, installation and mounting.
Figure 5-1 Input connection
To Next Page
Loading...
