© Siemens AG 2013. All rights reserved
A5E33120231-001, 12/2013 1
SITRANS F
Coriolis Flowmeters
SITRANS FC410 flowmeter
Quick Start
Before installing, including in hazardous areas, refer to the Operating Instructions on the internet or on the SITRANS F
documentation CD-ROM which is included in the product package. They contain detailed safety regulations, information and
specifications which must be observed when installing. Documentation and approvals can be found on the internet:
Flow documentation (http://www.siemens.com/flowdocumentation)
Proper handling
Correct, reliable operation of the device requires proper transport, storage, positioning and assembly. The device must be
carefully operated and maintained. Only qualified personnel should install or operate this device.
Items supplied
With M12 plug connection
● SITRANS FC410 flowmeter
● Sensor cable with M12 connector
● SD card with production certificates
● Quick Start guide
● CD containing software, certificates and device
manuals
With sensor terminal housing
● SITRANS FC410 flowmeter
● Sensor cable
● Packet of cable glands
● SD card with production certificates
● Quick Start guide
● CD containing software, certificates and device
manuals
Note
Supplementary information
Supplementary product and production specific certificates are included on the SensorFlash® SD card.
Note
Scope of delivery may vary, depending on version and add-ons. Make sure the scope of delivery and the information on the
nameplate correspond to your order and the delivery note.
To Next Page
Need help?
General
