SITRANS P, DS III series (7MF4.33.. 7MF4.34.. 7MF4.35..)
A5E03434631-02, 12/2012
23
Closing the device
1. Screw the covers ④⑦ back on as far as they will go.
2. Secure each cover with the cover catch
③⑥.
3. Close the key cover
①.
4. Tighten the screws in the key cover.
5. Check the tightness of the blanking plugs
⑤ and cable gland ② in accordance with the degree of protection.
8
① Key cover ⑤ Blanking plug
② Cable gland ⑥ Safety catch (front)
③ Safety catch (back) ⑦ Cover (front), optionally with inspection window
④ Cover (rear) for electrical terminal compartment ⑧ Safety catch for stainless steel enclosure
Figure 4-1 View of the transmitter: Left: Back right: Front view
To Next Page
Loading...
