To Next PageTo Next Page
Need help?Do you have a question about the Siemens SITRANS LR580 and is the answer not in the manual?
General| Type | Radar Level Transmitter |
|---|---|
| Output Signal | 4 to 20 mA, HART |
| Housing Material | Aluminum or Stainless Steel |
| Technology | FMCW radar |
| Process Temperature | -40 to +200 °C (-40 to +392 °F) |
| Process Pressure | -1 to 40 bar g (-14.5 to 580 psi g) |
| Accuracy | ± 2 mm |
| Protection Class | IP66/IP68 |
| Communication | HART |
| Ambient Temperature | -40 to +80 °C (-40 to +176 °F) |
| Enclosure Rating | IP66/IP68 |
| Beam Angle | 4° |
Provides an overview of the initial steps for device setup and configuration.
Instructions to maintain the device's status and ensure safe operation.
Warning about risks of modifications and consequences for warranty and approvals.
Qualifications for personnel and warnings for using equipment in hazardous areas.
Crucial safety precautions to observe during installation and handling.
WARNING for incorrect mounting in hazardous areas and general mounting notices.
Guidance on nozzle location, placement, and avoiding false echoes.
WARNINGs for unsuitable cables, conduit systems, and missing PE/ground connections.
WARNINGs for connecting/disconnecting in explosive atmospheres and energized states.
WARNING about improper power supply and nameplates for hazardous area installation.
Specific conditions of use and instructions for hazardous area installations.
DANGER and WARNING notices regarding toxic gases, hazardous areas, and error messages.
Steps for powering on the device, setting language, and running the quick start wizard.
Overview of commissioning using wizards and menu-driven parameters via HMI.
Step-by-step procedure for configuring the device for simple applications.
Instructions for navigating parameter view, selecting options, and changing numeric values.
Overview of commissioning wizards, important information, and parameter storage.
Recommendation to test the device configuration via simulation or physical test.
Reports measurement values in the order shown after startup.
Settings for saturation limits and verifying the device's mA output range.
How to simulate process values, loop current, and diagnostics.
Overview of remote operation capabilities and software tools.
Using SIMATIC PDM for configuration, monitoring, and maintenance.
Using the Quick Start wizard for initial device configuration.
Parameters related to the initial setup and configuration of the device.
Parameters related to device maintenance, diagnostics, and status monitoring.
Parameters related to user PIN, recovery ID, and button lock.
Comprehensive list of fault codes, their messages, causes, and corrective actions.
Common problems encountered during operation and their solutions.
Explains issues like loss of echo, fixed readings, and false echoes.
Overview of SIMATIC PDM as a tool for configuration, commissioning, and diagnostics.
