Need help?Do you have a question about the Siemens SITRANS LR150 and is the answer not in the manual?
General| Type | Radar level transmitter |
|---|---|
| Frequency | 80 GHz |
| Housing Material | Aluminum or stainless steel |
| Process Temperature | -40 to +80 °C |
| Output Signal | 4-20 mA |
| Communication Protocol | HART |
| Enclosure rating | IP68 |
| Measuring Principle | Frequency Modulated Continuous Wave (FMCW) |
Notes on specific safety instructions for Ex applications.
Explains how the radar transmitter works and its application.
Details polarization, reference point, and installation position.
Details cable screening, grounding, and cable gland types.
Illustrates electrical connections and terminal layout.
Securing settings against unwanted changes using user PIN.
Explains device operation via HMI keys and display elements.
Details display elements, symbols, and navigation.
Guides on selecting and changing parameters and numeric values.
Procedure for using wizards for basic application setup.
Configuring operation modes for level, space, and distance measurement.
Configuring operation modes, material type, and vessel shape for volume.
Configuring operation modes, material type, and measuring structure.
Using wizard to prevent false echo detection in a specified range.
Configuring lower/upper calibration points and transmitter offset.
Setting loop current mode, damping, and output characteristics.
Configuring saturation limits, fault current, and safety functions.
Configuring lower/upper calibration points, measuring structure, and flow units.
Steps for connecting the device via Bluetooth adjustment app.
Downloading and using EDD for PDM adjustment programs.
Troubleshooting 4-20 mA signal errors and fault message codes.
Explains status messages categorized by failure, function check, etc.
Guides on diagnosing and correcting various measurement value errors.
Specifications for materials, weights, torques, and input variables.
To Next Page