To Next PageTo Next Page
Need help?Do you have a question about the Siemens SITRANS L LU240 and is the answer not in the manual?
General| Manufacturer | Siemens |
|---|---|
| Product Name | SITRANS L LU240 |
| Measuring Principle | Ultrasonic |
| Frequency | 50 kHz |
| Process Temperature | -40 to +80 °C |
| Communication Protocol | HART |
| Power Supply | 12 to 36 V DC |
| Protection Class | IP68 |
| Type | Level Transmitter |
| Accuracy | ± 0.25 % |
| Output Signal | 4 to 20 mA |
| Material | PVDF |
Essential prerequisites and general safety information before operating the device.
Considerations for safe operation in specific or unusual application environments.
Specific safety instructions and qualifications required for operation in hazardous locations.
General safety precautions to be observed during installation and mounting procedures.
Guidelines for selecting an appropriate and safe location for device installation.
Instructions for correct mechanical installation and process connection of the device.
Essential safety precautions required before connecting the device's electrical circuits.
Detailed steps for wiring and connecting the SITRANS Probe LU240 to power and signal circuits.
Specific requirements and safety measures for connecting the device in hazardous environments.
Safety instructions to ensure correct and safe commissioning of the device.
Procedure for configuring and starting up the device using its local interface.
