Siemens SITRANS LR150 - Quick Setup Volume Flow

Setup with the integrated HMI
7.5.4Quick setup volume flow
Setting No:
The wizard is closed and settings are not applied. They must be entered again when
the wizard is run again.
7.5.4 Quick setup volume flow
Mode
OPERATION:
Sets the mode of operation that determines the output and display:
Setting Description
Level LEVEL
Space SPACE
Distance DIST
Volume VOL
Volume flow VFLOW
1
Transmitter reference point
2
Upper calibration point
3
Lower calibration point
4
Far range
5
Zero level (head)
6
Level (head)
7
Material surface
8
Upper scaling point (max. volume/flow)
Figure7.8 Overview quick setup volume flow
SITRANS LR150
Operating Instructions, 08/2020, A5E50352155
41