Siemens SITRANS LR150 - Volume Flow

Setup with the integrated HMI
7.7.6Volume flow
7.7.6 Volume flow
Note
This menu is only visible on the device if it is configured.
Lower calibration point
LOWER CAL POINT:
Sets the distance from the transmitter reference point to the lower calibration point.
Upper calibration point
UPPER CAL POINT:
Sets the distance from the transmitter reference point to the upper calibration point.
Measuring structure
Sets the version of the measuring structure used.
Setting Selection Selection Description
Other required parameters
PBFLM Palmer-Bowlus flume
RWRC Venturi flume, trapezoidal
weir, rectangular overfall
TPVWR V-Notch, triangular weir
VOLUME FLOW FLUME TYPE
CUSTM Custom
Flow unit
Sets the measurement units for the volume flow.
Setting Selection Selection Description
m
3
/h Cubic metre
L/min Litres
Ga/min US gallons
VOLUME FLOW VFLOW UNITS
IGa/min British Gallons
52
SITRANS LR150
Operating Instructions, 08/2020, A5E50352155