Siemens SITRANS LR150 - Adjustment

Description
3.3Adjustment
Functional principle
The transmitter emits a continuous, frequency-modulated radar signal through its
antenna. The emitted signal is reflected by the medium and received by the antenna
as an echo with modified frequency. The frequency change is proportional to the
distance and is converted into the level.
3.3 Adjustment
Local adjustment
On-site adjustment of the device is carried out via the optionally integrated HMI.
Wireless adjustment
Devices with integrated Bluetooth module can be adjusted wirelessly via
SiemensmobileIQapp.
1
Transmitter
2
Smart device
Figure3.3 Wireless connection to standard operating devices with integrated BluetoothLE
Adjustment via the signal cable
Devices with signal output 4…20mA/HART can also be operated via a signal cable.
This is done via an interface adapter and a PC/notebook using SIMATICPDM.
SITRANS LR150
Operating Instructions, 08/2020, A5E50352155
9