Siemens SITRANS LR150 - Menu Overview

Setup with the integrated HMI
7.3Menu overview
5
EDIT" symbol (flashing)
Figure7.5 Editing view
Ten minutes after the last key is pressed, an automatic return to the measured value
view is triggered. Parameter changes that have not yet been confirmed are lost.
7.3 Menu overview
Menu item Parameter Setting Default
OPERATION LEVEL
OPERATION = LEVEL
STRGE Vessel
PRCSS Process vessel with agitation
WTWLL Wet well
PLSTC Outside of Plastic Tank
OPEN Level of open liquid
MATERIAL TYPE LIQUID
DEMO Demonstration
STRGE
SILO Silo
BIN Buffer, surge bin
MATERIAL TYPE SOLID
OPEN Heap, pile
SILO
UNITS = DeviceUnits,
Physical Value Unit
mm, m, in, ft m
LOWER CAL PT Level Adjustment Data 15m
UPPER CAL PT Level Adjustment Data 0m
COMMISSION
CONFIRM
OPERATION = SPACE
STRGE Vessel
PRCSS Process vessel with agitation
WTWLL Wet well
PLSTC Outside of Plastic Tank
OPEN Level of open liquid
MATERIAL TYPE LIQUID
DEMO Demonstration
STRGE
SILO Silo
BIN Buffer, surge bin
MATERIAL TYPE SOLID
OPEN Heap, pile
SILO
COMMISSION
UNITS, LOWER CAL PT,
UPPER CAL PT, CONFIRM
See OPERATION = LEVEL
OPERATION = DISTANCE
STRGE Vessel
PRCSS Process vessel with agitation
WTWLL Wet well
COMMISSION
MATERIAL TYPE LIQUID
PLSTC Outside of Plastic Tank
STRGE
SITRANS LR150
Operating Instructions, 08/2020, A5E50352155
29