Siemens SITRANS LR150 - Display

Setup with the integrated HMI
7.7.8Display
X-value 1…X-value 32
Sets level index markers for which the output is known.
Y-value 1…Y-value 32
Sets the output that corresponds to each input index marker entered.
7.7.8 Display
Start view
Sets the process value that appears first on the display after switching on.
Setting Description
Level LEVEL
Space SPACE
Distance DIST
Volume
a
VOL
Volume flow
b
VFLOW
Loop current LOOPC
Percentage value %
LOCL DISPLAY
Electronics temperature STEMP
a
If the mode of operation is set accordingly
b
If the mode of operation is set accordingly
Note
If the parameter " Operation" is set in the wizard, the value is automatically written
to the parameter " Start view".
If the parameter " Start view" or " PV selector" is changed after the wizard has been
executed, the last change is valid.
The options " Volume", " Volume flow" and " Custom" are only visible in the
" Measured value view" if configured. If you select an option which is not configured
in the parameter " Start view" then the next visible process value appears in the
measured value view.
54
SITRANS LR150
Operating Instructions, 08/2020, A5E50352155