Siemens SITRANS Probe LU240 - Getting Started

SITRANS Probe LU240 with mA/HART
Compact Operating Instructions, 09/2021, A5E42673704-AE
5
Getting started
1
Introduction
Use this chapter as a quick reference. It provides links to the steps required for startup.
Before you begin, read the following safety information:
• General safety information (Page 10)
• Basic safety information: Installing/mounting (Page 15)
• Basic safety information: Connecting (Page 21)
• Basic safety information: Commissioning (Page 28)
Read the entire Operating Instructions to achieve optimum device performance.
Procedure
1. Install/mount the device.
Installation location requirements (Page 16)
2. Connect the device.
Connecting SITRANS Probe LU240 (Page 21)
3. Install (optional) display
Install a new display (Page 45)
4. Power up the device.
Activating SITRANS Probe LU240 (Page 28)
5. Commission the device via quick commissioning wizard:
Quick commissioning: Level/Space/Distance/Custom (Page 35)
Quick commissioning: Volume (Page 40)
Quick commissioning: Volume flow (Page 41)
Startup is complete.