Device-specific Safety Instructions
Safety Manual
Operating Instructions, 06/2012, A5E03433511-05
17
3.5 Behavior in case of faults
Faults
The procedure in case of faults is described in the Operating Instructions of the device.
Repairs
Defective devices should be sent to the Repair Department stating details and cause of any
fault. When ordering replacement devices, also the serial number of the original device shall
be mentioned. The serial number can be found on the nameplate.
Reference
Addresses of the responsible repair center, contact partners, spare parts lists etc. can be
obtained from the SITRANS SL Operating instructions, sections A.4 and A.5 as well as from
the following web address:
See also
web (http://support.automation.siemens.com)
To Next Page
Loading...
