What does F5 error mean on Siemens Measuring Instruments and how to fix it?
Error code F5 indicates that the battery charge is below the preset limitation. Replace the battery pack to resolve this issue.
What does F3 error mean on Siemens Measuring Instruments?
Error code F3 indicates an internal software failure. Contact your supplier for assistance.
What does F4 error mean on Siemens Measuring Instruments?
Error code F4 indicates an internal software failure. Contact your supplier for assistance.
What does F1 error mean on Siemens Measuring Instruments?
Error code F1 indicates that there is no water in the upper part of the pipe and/or the cables or transducer 1A or 1B are defective.
What does F2 error mean on Siemens Measuring Instruments?
Error code F2 indicates that there is no water in the lower part of the pipe and/or the cables or transducers for 2A or 2B are defective.
What to do if Siemens Measuring Instruments display is blank?
If the display is blank, check the flowmeter version. Note that the battery version cannot run on mains power. Ensure the battery plug is connected, the battery is not empty, and the mains power is not interrupted. If you have a battery version, replace the battery pack.
General| Brand | Siemens |
|---|---|
| Model | SITRANS FUS380 |
| Category | Measuring Instruments |
| Language | English |
To Next Page