EasyManua.ls Logo

Siemens SITRANS FUS380 - Battery

Siemens SITRANS FUS380
118 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10.5 Battery
Table 10-5 Battery types
Description Specifications
Main battery
(for battery-powered
versions)
Replaceable 3.6 V LiSOCl (Lithium Thionyl Chloride) dual battery pack 34 Ah
of two D-cell types
Back-up battery
(for mains-powered ver‐
sions)
Single battery 17 Ah of one D-cell type
Note
The batteries are not rechargeable; they should be replaced after maximum 6 years.
Consumption and battery operation time calculation
For battery versions, the battery operation time depends on the connected battery pack as well
as the operation conditions of device.
Every 5 minutes the advanced power management system of the transmitter calculates the
battery consumption and the remaining battery operation time.
For battery versions, only the internal battery pack has a nominal capacity of 34 Ah giving a
typical operation time up to 6 years in a revenue application.
The ambient temperature of the transmitter also influences the battery capacity.
The typical operation time up to 6 years is based on only 80% battery capacity, low pulse output
frequency, seldom use of communication and an operation time/temperature profile of 5% at 0
°C (32 °F), 80% at 15 °C (59 °F) and 15% at 50 °C (122 °F).
The effect of other temperatures is shown in the figure below.
A variation in temperature from 15 °C to 55 °C (59 °F to 131 °F) reduces the capacity by 17%
(in the figure from 15 Ah to 12½ Ah).
$YDLODEOHFDSDFLW\
7HPSHUDWXUH
&DSDFLW\WR9$K
Technical data
10.5 Battery
SITRANS FUS380/FUE380
92 Operating Instructions, 05/2018, A5E00730100-AE

Table of Contents

Related product manuals