Siemens SITRANS FUS380 - Connecting Power Supply Cable (Main-Powered Systems Only)

5. Click transmitter connection board into terminal box.
67 66
57 56
1
2
3
4
5
6
6. Mount and tighten cable gland (approx. 20 Nm).
7. Connect protective earth wire.
67 66
57 56
Note
Cables with voltage
Keep the connection cable separated from cables with voltages > 60 V.
5.4.2.3 Connecting power supply cable (main-powered systems only)
WARNING
Power supply requirements
Make sure the power supply requirements stated on the nameplates are met!
Connecting
5.4 Remote system
SITRANS FUS380/FUE380
40 Operating Instructions, 05/2018, A5E00730100-AE