Siemens SITRANS FUS380 - Transmitter Side; Connecting Battery (Battery-Powered Versions and Mains-Powered Versions with Back-Up Battery); Connecting Siemens Sensor Link Cable

5.4.2 Transmitter Side
5.4.2.1 Connecting battery (battery-powered versions and mains-powered versions with back-up
battery)
Plug in male battery plug. Ensure that the wire is inserted into the small channel leading from
plug to battery.
5.4.2.2 Connecting Siemens sensor link cable
1. Remove blind plug.
2. Push the Siemens sensor link cable through the opening.
3. Click the Siemens sensor link cable onto transmitter connection board (B).
B
4. Turn transmitter connection board so connection cable is facing downwards.
Connecting
5.4 Remote system
SITRANS FUS380/FUE380
Operating Instructions, 05/2018, A5E00730100-AE 39