Siemens SITRANS FUS380 - Ordering of Spare Parts

Parameter Default setting
Parity Even
Stop bit 1
Response timeout 10000 ms
Response delay 5 ms
Interframe space 35 bits
The settings can be changed by way of SIMATIC PDM or through the Modbus communication.
To support the option with current output module the s in the preceding table are recommended.
B.3 Ordering of spare parts
Ensure that your ordering data is not outdated. The latest ordering data is always available on
the Internet: Process instrumentation catalog (
http://www.siemens.com/
processinstrumentation/catalogs)
Settings
B.3 Ordering of spare parts
SITRANS FUS380/FUE380
Operating Instructions, 05/2018, A5E00730100-AE 113