5.4.1 Sensor side
5.4.1.1 Connecting Siemens sensor link cable
1. Remove terminal box lid.
2. Remove a blind plug.
3. Push connection cable through opening.
4. Click connection cable onto sensor connection board (A).
5. Mount and tighten cable gland (approx. 20 Nm).
5.4.1.2 Finishing connection
Remount terminal box lid.
Note
Hot surfaces
Ensure that the connection cable does not come into contact with a hot sensor/metering tube.
Note
Grounding
To ensure identical potential for sensor and transmitter, a direct grounding of transmitter and
sensor is recommended.
Connecting
5.4 Remote system
SITRANS FUS380/FUE380
38 Operating Instructions, 05/2018, A5E00730100-AE
To Next Page
Loading...
