Menu Parameter Display example Comments
Menu 4 Alarm codes Each code refers to a specific
alarm.
Menu 5 Display test Check of all segments. Dis‐
play toggles between all seg‐
ments on/off.
Table 6-4 Service menu
Menu Parameter Display example Comments
Service menu The service menu is accessi‐
ble from all menus by press‐
ing push button for minimum
2 seconds. For more informa‐
tion on the complete service
menu, see Service menu
(Page 72).
6.4 Start-up routine
1. Power-up device.
2. Reset battery status indicator as described below (battery-powered versions only).
Resetting the battery counter
Note
The reset can also be carried out via SIMATIC PDM.
When a new battery is installed and the plug is connected, the transmitter start-up routine
begins. The display shows the actual software version, e.g. 2.04.
Commissioning
6.4 Start-up routine
SITRANS FUS380/FUE380
Operating Instructions, 05/2018, A5E00730100-AE 51
To Next Page
Loading...
