Siemens SITRANS TH Series - Page 22

SITRANS TH/TR/TF
22 A5E32520693-01, 06/2013
4.8.7
Power supply connection
SITRANS TH
SITRANS TR
TH100 displayed here, display differs
for each product
Test terminals (Test) Auxiliary power supply connection/4 to
20 mA (U
aux
)
4.8.8
Coding profiles
Coding profile for SITRANS TR200/TR300
with protection against explosions (intrinsically safe)
Coding profile for SITRANS TR200/TR300
without protection against explosions
MLFB: 7NG303*-1JN00
MLFB: 7NG303*-0JN00
4.9
SITRANS TF onnection
4.9.1
Opening the device
Procedure
1. Unscrew the cover of the electrical cable compartment. See Chapter "Closing the device (Page 24)".
An identification text "FIELD TERMINAL" is provided at the side of the housing.
4.9.2
SITRANS TF Connection
Note
SITRANS TF Connection
The SITRANS TF comes with a built
-in transmitter: SITRANS TH200, TH300, or TH400. To connect a sensor to the
SITRANS TF, use the appropriate sensor/transmitter connetion diagram, see
SITRANS TH/TR connection (Page 18).