To Next PageTo Next PageWhat to do if Siemens Transmitter shows maximum supply voltage exceeded?
If the Siemens Transmitter detects that it is operated above its specified supply voltage range, check the power supply at the output terminals.
How to resolve a process value tolerance issue on a Siemens Transmitter?
If at least one process value violates one of the process tolerance limits set in the Siemens Transmitter parameters, check the parameter settings for limits for this application.
How to fix an error in communication with input CPU on a Siemens Transmitter?
If the Siemens Transmitter experiences an unrecoverable error in the internal communication to the input CPU, reset the device or switch it off and back on.
How to resolve an input CPU reconfiguration failure on a Siemens Transmitter?
If the Siemens Transmitter experiences an unrecoverable error in the input CPU, reset the device or switch it off and back on.
What to do if Siemens SITRANS TH320 has electronics defect?
If there is a defect in the Siemens Transmitter electronics, a replacement of the device is recommended.
General| Power Supply | 12 to 36 V DC |
|---|---|
| Communication Protocol | HART |
| Housing material | Aluminum, stainless steel |
| Output Signal | 4-20 mA, HART |
| Display | Optional |
| Ingress Protection | IP66/IP67 |
| Input | Thermocouple, RTD |
| Ambient temperature | -40 to +85 °C (-40 to +185 °F) |
| Configuration | Via HART |
| Process Connection | G 1/2 or 1/2 NPT |
