Siemens SXG 75 - Page 46

Release 1.1
Technical Documentation
11/2005
TD_Repair_L1-L3_SXG75_R1.1.pdf Page 46 of 61
WCDMA Test:
With the availability of the GRT Test /Alignment software, this tool has to be used to perform
the outgoing test!
>Connect the mobile/board via internal antenna (antenna coupler) and external antenna
(car cradle/universal antenna clip) to a WCDMA tester
>Use a Test USIM
Internal Antenna
Test case Parameter Measurements Limits
1 Location Update • Band 1
2 Call from NodeB
3 WCDMA TX Test • UARFCN 10750
• ULTA -30
• Peak Power (dBm)
• Magnitude Error RMS
• EVM RMS
• Phase Error RMS
• Frequence Error Average
• WCDMA Spec.
4 Call relaese from NodeB
External Antenna
5 Call from UE
6 Audio Test • Audio Loop • Individual check
7 WCDMA TX Min Power • Peak Power (dBm)
• Magnitude Error RMS
• EVM RMS
• Phase Error RMS
• Frequence Error Average
• WCDMA Spec
8 WCDMA TX Max Power • Peak Power (dBm)
• Magnitude Error RMS
• EVM RMS
• Phase Error RMS
• Frequence Error Average
• WCDMA Spec
9 Call relaese from NodeB
10 Test RX BER • UARFCN 10750
• ULTA -30
• Bit Error Rate
• Block Error Rate
• WCDMA Spec
Company Confidential
2005©BenQ