TC35i: Migration from TC35 to TC35i
PRELIMINARY
TC35_TC35i_MIG_01_V01.01 29.1.2003 Page 28 of 34
# AT Command
Differing parameters
TC35i
Filler "FF" will be displayed at PDU status report if
<FF> is set to 1 at AT^SSCONF
127 AT+CMGS Send SMS message
128 AT+CMGW Write SMS message to memory
129 AT+CMSS Send SMS message from storage
130 AT+CNMA New SMS message acknowledge to ME/TE, only phase 2+
131 AT+CNMI New SMS message indications
Differing implementation related to GSM phase 2+ compatibility issues and +CNMA
requirements; differing notes
TC35i
AT+CNMI settings requiring phase 2+
should be independent from AT+CSMS!
WRITE syntax:
Note 2: - (not enforced)
Note 3: - (not enforced)
Note: - (not required)
TC35
WRITE syntax:
Note2: The rules <mt>=2 and <mt>=3 for storing received
SM are possible only if phase 2+ compatibility is activated with
+CSMS=1
Note3: The parameter <ds>=1 is only available in phase 2+
Note:
Parameters <mt>=2,3 and <ds>=1 are only available with
GSM phase 2+ (see +CSMS=1). Incoming SMs or Status
Reports have to be acknowledged with AT+CNMA=0 when
using these phase 2+ parameters.
132 AT+CPMS Preferred SMS message storage
Differing parameters and implementation
To Next Page
Loading...
Need help?
General
