Siemens THE PROBE - Mounting; Threaded Mounting; Flange Adapter Mounting; Sanitary Mounting

Page 2 The Probe – INSTRUCTION MANUAL A5E32243983
mmmmm
English
Mounting
Threaded
Flange Adapter (optional)
Sanitary (Non Intrinsically Safe)
Note: Mount the Probe so that the face of the sensor is at least 25 cm above the highest
anticipated level.
hinged lid
117 mm
(4.6”)
cable entry
‘knock out’
87 mm
(3.4”) ø
61 mm
(2.4”)
53mm
(2.1”)
ø max
sensor
mounting
thread
electronics
34 mm
(3.3”)
max.
7 mm
(0.3”)
279 mm
(11”)
74 mm
(2.9”)
thread type
identification
The Probe is available in three
thread types: 2” NPT, 2” BSP or
PF2.
Note: Before inserting The
Probe into its mounting hole,
ensure that the threads are of
the same type to avoid
damaging The Probe threads.
The Probe can be fitted with the optional 75 mm
(3") flange adapter for mating to 3" ANSI, DIN
65PN10 and JIS 10K3B flanges.
The
Probe
optional
flange
adapter
hinged lid
117 mm
(4.6")
cable entry
’knock out’
87 mm
(3.4") ø
61 mm
(2.4")
7 mm
(0.3")
84 mm
(3.3") max.
electronics
mounting
thread
sensor
53 mm
(2.1")
ø max.
279 mm
(11")
76 mm
(2.9")
integral
sealing ring
Notes:• Mount The Probe so that the face of
the sensor is at least 25 cm above
the highest anticipated level.
• The sanitary Probe is suitable for
chemical clean-in-place
applications to 60 °C (140 °F) only.
Ensure your cleaning chemicals are
compatible with PVDF.