Siemens TX-I/O TXM1.8X-ML - Page 19

19/54
Siemens TX-I/O™ Module system – Functions and operation CM110561en_08
Building Technologies Digital input functions 2018-10-25
Examples
Events identified
Zeitlicher Ablauf mit gesendeten Events
Flags
• Rising slope
• Short pulse
• Long pulse
• Very long pulse
(Tg 5 activated)
• Falling slope
tp
tp
tr
tr
Tg 2 Tg 3 Tg 2 Tg 4 Tg 5 Tg 6
tr
Tg 5
tr
ShortDoubleClick
disabled
• Rising slope
• Short pulse
• Short double-click
• Short/long double-click
• Falling slope
tp
tp
Tg 2 Tg 3 Tg 2 Tg 7
td
td
tp
Tg 8
tp
Tg 2 Tg 7
td
tp
Tg 9
Tg 6
tr
tr
ShortDoubleClick
enabled
• Rising slope
• Long pulse
• Long double-click
• Falling slope
tp
tr
Tg 2 Tg 4 Tg 5 Tg 6
tr
tr
td
tp
tr
Tg
2 Tg
4
td
Tg 10
tr
Tg 11
LongDoubleClick
enabled
• Rising slope
• Dual click (both buttons
simultaneously)
• Falling slope
tp
Tg 2
UP
DN
Tg 12
Tg 13
DualClick
enabled
Digital inputs cannot be operated locally.
The I/O status LED is ON when when the N/O connected contact is closed
For details, especially in relation to flashing pattern and errors: refer to the section "Dis-
play, operation and diagnostics" in the TX-I/O™ Engineering and installation guide [6].
Local override
Display