Siemens WM14LPH0ES - Connecting the Appliance

en Installation and connection
14
1. Pull the hoses out of the holders.
2. Unscrew and remove all 4
screws for the transit bolts with a
WAF 13 wrench.
3. Pull the power cable out of the
holder.
4. Remove the 4 sleeves.
5. Put on the 4 cover caps.
6. Press down on the 4 cover caps.
4.5 Connecting the appliance
Connecting the water inlet hose
Note:Observe the information on
safety →Page4 and preventing ma-
terial damage →Page10.