Siemens WM14LPH0ES - Starting the Programme with Intelligent Dosing Sys- Tem

en Intelligent dosing system
42
Intelligent dosing system
15 Intelligent dosing sys-
tem
Intelligent dosing system
The optimum quantities of liquid de-
tergent and fabric softener are dis-
pensed automatically depending on
the programme and settings.
15.1 Starting the programme
with intelligent dosing
system
If you do not want to dose liquid de-
tergent and fabric softener manually,
use the intelligent dosing system.
This function is available depending
on the selected programme and is
activated automatically.
Notes
¡ Please read the information in the
Safety →Page4 and Preventing
material damage →Page10 sec-
tions to ensure that you use the
appliance safely.
¡ If you are using the intelligent dos-
ing system, do not add additional
detergent or fabric softener into
the compartment for manual dos-
ing.
→"Adding detergent and care
product", Page40
If you want to dose manually for a
set programme, observe the
following information:
– Deactivate the intelligent dosing
system before starting the pro-
gramme. The selected settings
are retained even after the appli-
ance has been switched off.
→"Buttons", Page23
→"Buttons", Page23
– Pour detergent or fabric softener
into the compartment for manual
dosing.
→"Adding detergent and care
product", Page40
– Activate the intelligent dosing
system once the programme
has ended.
→"Buttons", Page23
→"Buttons", Page23
Requirements
¡ The laundry is prepared.
→"Preparing the laundry", Page36
¡ The laundry is sorted.
→"Sorting laundry", Page36
¡ The laundry is placed in the appli-
ance.
→"Loading laundry", Page40
¡ The programme is set.
→"Setting a programme", Page39
¡ The intelligent dosing system is ac-
tivated.
→"Buttons", Page23
→"Display", Page21
→"Display", Page21
1.
Fill the dispensers →Page43.
To replace the contents of the dis-
penser with another product, clean
the detergent drawer →Page49.