Siemens WM14LPH0ES - Basic Dosage; Home Connect; Connecting the Appliance to a WLAN Home Network (Wi-Fi) with WPS Function

en HomeConnect
44
2. To set ⁠ , press ⁠ i-Dos.
a The display shows ⁠ .
3. To set ⁠ , press ⁠ i-Dos again.
4. To end the setting process, wait
briefly.
15.4 Basic dosage
The basic dosage depends on the
manufacturer's instructions for the de-
tergent, the water hardness and the
degree of soiling of the laundry.
Always set a basic dosage that cor-
responds to the dosage for a stand-
ard load of 4.5 kg.
→"Detergent dosage", Page38
Adjusting the basic dosage
1. Press and hold i-Dos for ap-
prox. 3 seconds.
a The display shows the basic
dosage set for ⁠ .
2. To adjust the setting, press / ⁠ .
3. To end the setting process, wait
briefly.
Note:To adjust the basic dosage for
⁠ , repeat the steps with ⁠ i-Dos.
HomeConnect
16 HomeConnect
HomeConnect
This appliance is network-capable.
Connecting your appliance to a mo-
bile device lets you control its func-
tions via the HomeConnect app, ad-
just its basic settings and monitor its
operating status.
The HomeConnect services are not
available in every country. The avail-
ability of the HomeConnect function
depends on the availability of
HomeConnect services in your coun-
try. You can find information about
this at: www.home-connect.com.
¡ →"Connecting the appliance to a
WLAN home network (Wi-Fi) with
WPS function", Page44
¡ →"Connecting the appliance to a
WLAN home network (Wi-Fi)
without WPS function", Page45
The HomeConnect app guides you
through the entire login process. Fol-
low the instructions in the HomeCon-
nect app to configure the settings.
Tips
¡ Please consult the documents sup-
plied by HomeConnect.
¡ Please also follow the instructions
in the HomeConnect app.
Notes
¡ Please note the safety precautions
in this instruction manual and
make sure that they are also ob-
served when operating the appli-
ance via the HomeConnect app.
→"Safety", Page4
¡ Operating the appliance on the ap-
pliance itself always takes priority.
During this time it is not possible
to operate the appliance using the
HomeConnect app.
16.1 Connecting the appli-
ance to a WLAN home
network (Wi-Fi) with
WPS function
Requirements
¡ Your router has a WPS function.
¡ Wi-Fi is activated on the router.
¡ The Wi-Fi basic setting is activated
on the appliance.
→"Activating Wi-Fi on the appli-
ance", Page46
¡ The appliance receives signals
from the WLAN home network (Wi-
Fi) at its installation location.
¡ The HomeConnect app is installed
on your mobile device.
1. Press and hold for at least
3seconds.
a The display shows Aut.
2. Press ⁠ .