Siemens WM14LPH0ES - Page 22

en Display
22
Display Designation More information
⁠ Voltage control
system
Flashes: The programme has been
paused because of impermissible voltage
drops. The voltage is permissible again
and the programme will continue.
Note:The programme duration is exten-
ded.
Foam detection
system
The appliance has detected too much
foam.
⁠ Door ¡ Lights up: The door is locked and can-
not be opened.
¡ Flashes: The door is not closed prop-
erly.
¡ Off: The door is unlocked and can be
opened.
⁠ Tap ¡ No water pressure.
¡ The water pressure is too low.
Detergent drawer The detergent drawer has not been
pushed in fully.
E:35 / -10
1
Error Error code, error display, signal.
1
Example