EasyManua.ls Logo

Sierra Wireless Overdrive Pro - Tips

Sierra Wireless Overdrive Pro
180 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Resources 125
Resources
Section 6C
Tips
⽧ Extending Battery Life (page 125)
⽧ Device Location (page 126)
⽧ Improving Signal Strength (page 126)
⽧ Improving 3G Network Service (page 126)
⽧ Improving Wi-Fi Performance (page 127)
⽧ Security Tips (page 128)
⽧ Finding the MAC Address (page 128)
⽧ Finding the IP Address (page 129)
Extending Battery Life
● Consider purchasing and using a battery extender (a high-capacity battery that provides
improved battery life; available at
https://www.sierrawireless.com/eStore).
● When y
ou’re not using the device, turn it off, or end the 3G/4G connection. (Click Disconnect on
the home page or in the Mini Window.)
● Connect the de
vice through the micro-USB cable to your computer, and disable Wi-Fi. (See
“Disabling Wi-Fi When Connected Through USB” on page 94.)
● Adjust the L
CD — do one or more of the following:
䡲 T
urn the LCD off (Advanced settings > Device > Display > LCD Backlight).
䡲 Decr
ease the brightness of the LCD (Advanced settings > Device > Display > Backlight
Settings > On Battery/USB Power).
䡲 Set the L
CD to turn off sooner. (See “Setting the LCD Timeout” on page 71.)
● Con
figure the setting (for when battery powered or connected via USB) to “Short Wi-Fi Range”
(
Advanced settings > Wi-Fi > Network > Battery or USB Powered).
● Enable
standby (low power) mode. (See “Standby (Low Power) Mode” on page 49.)
● T
urn off the lighting of the power button (that is, LED) (Advanced settings > Device >
Display > Power Button LED).
● Limit the nu
mber of Wi-Fi users (Advanced settings > Wi-Fi > Network > Max Number of Users).
● If y
ou have 3G but not 4G coverage, set WAN mode to “3G only” (Advanced settings > WAN >
Setup > WAN Mode
).
● Set
Wi-Fi > Network > Wi-Fi Power Save Mode to “On.”
(If your computer tends to lose the Wi-Fi connection and stops responding, set this field to
“Of
f.”)
● If GPS is enabled and you’re using your device from the same location, set
GPS Mode to
“One-time.” (See “Setting the GPS Mode” on page 97.)

Table of Contents