36
All Sigma Controls, Inc. products are warranted to be free from
defective materials and workmanship for one (1) year from date of
shipment. Sigma reserves the right to repair or replace at its option
any product found to be defective. In no event shall Sigma
Controls, Inc. be liable for any consequential, incidental, or special
damages and the limit of its liability shall not exceed the purchase
price of the supplied equipment.
SENSORS AND CABLE THAT HAVE BEEN USED IN WASTE
WATER OR HAZARDOUS LIQUIDS MUST BE THOROUGHLY
CLEANED BEFORE RETURNING. UNITS RETURNED UNCLEANED
WILL BE CONSIDERED UNREPAIRABLE AND RETURNED TO
SENDER OR DISCARDED. NOTE: DO NOT SUBMERGE UNITS
FOR CLEANING WITH CABLE CUT OR REMOVED. THIS WILL
ALLOW CLEANING FLUID TO ENTER HOUSING, DAMAGING
ELECTRONICS AND VOIDING THE WARRANTY.
RETURN FOR REPAIR POLICY (WARRANTY/NON
Return status can be determined upon factory inspection of returned
equipment.
A completed Return Authorization form must accompany all items returned
for repair.
Repairs will be evaluated as quickly as possible. Cost for non-warranty
repairs will be provided before repairs are initiated and repairs will be
completed only after approval by customer.
217 S. 5th Street, Perkasie, PA 18944 PH: 215-257-3412 FAX: 215-257-3416
To Previous Page
Loading...
Need help?
General