Need help?Do you have a question about the Sigma Controls MYRIAD DPC and is the answer not in the manual?
General| Brand | Sigma Controls |
|---|---|
| Model | MYRIAD DPC |
| Category | Controller |
| Language | English |
Details on how to order the Myriad DPC controller, including case options.
Details on analog/digital I/O, power, environmental, and enclosure specifications.
Comprehensive list of the controller's hardware and software capabilities.
Diagram illustrating the typical wiring for the Myriad DPC with an auxiliary PCB.
Guide to navigating setup screens, entering passwords, and accessing menus.
Steps for configuring input type and decimal point settings for signal scaling.
Selecting engineering units and configuring display filter settings.
Setting speed scaling parameters and configuring analog output 4 retransmission.
Configuring timers, trend screens, and alarm horn settings.
Configuring PID direction, control modes, float control, and pump settings.
Configuring level alarms and pump alternation modes.
Reviewing system status, alarms, and accessing view menu options.
Guidelines for physical checks and routine maintenance of the controller.
Solutions for common problems like unit lock-up or display issues.
Explaining the diagnostic screen for monitoring input/output status and troubleshooting.
Listing of digital inputs and outputs and their functions.
Notes on using the auxiliary diagnostic screen and alarm notifications.
Detailed explanation of various pump alarm conditions and their causes.
Guide to selecting analog input ranges using dip switches.
Points out differences between DPC V1.8 and V1.9 upgrades.
Details on the functions and terminal assignments of the auxiliary PCB option.
Table of Modbus addresses, descriptions, ranges, and access types.
Information on RS485 network cabling, pinouts, and communication settings.
Procedures and conditions for returning units for warranty or non-warranty repair.
To Next Page