Sigma 2-16PK - Page 60

Operating Manual SIGMA 2-16PK page 60 of 77
05/2007
Part no. Description
13021
Adapter for PCR-tube 0.2 ml, ∅ 5.85/6.95 x
20/23.4 mm, e.g 15042, suitable for 11124,
12132, 12148, polyallomer
13059 Adapter for 1 tube with screw cap 10-12 ml,
max. Ø 16.2/19 x 75 - 85 mm, e.g. 15000,
15010, 15039, suitable in 12139
15014 Reaction vials 0.4 ml (Beckman system),
polypropylene, 1 pack contains 100 pcs.,
suitable for 13000
15005 Reaction vials 0.5 ml, Ø 7.9/10 x 28/31 mm, 1
pack contains 100 pcs., suitable for 13002
15008 Reaction vials 1.5 ml, 1 pack contains 100 pcs.,
suitable for 11124, 12133, 12148
15040 Reaction vials 2.2 ml, 1 pack contains 100 pcs.,
suitable for 11124, 12133, 12148
15042 PCR tube 0.2 ml, 1 pack contains 100 pcs.,
suitable for 13021, 12104
15010 Polycarbonate tube with screw cap 12 ml,
∅ 16.1 x 81.1 mm, suitable for 12141, 13059
15000 ditto, Teflon
15039 ditto, polypropylene
15020
Polystyrene tube 15 ml, ∅ 17 x 100 mm,
suitable for 11191, 12072, 12073, 13012,
13042, 14030, 14034
15021 Polypropylene stopper for 15020, 15023
15023
Polypropylene tube 15 ml, ∅ 17 x 100 mm,
suitable for 12072, 12073, 13012, 14030, 14034
15115 Culture tube with screw cap 15 ml, pointed
bottom, suitable for 12072, 12073, 13060
15029 Teflon tube with screw cap 28 ml, Ø 25.3 x 96
mm, 12139, 14031
15030 Polycarbonate tube with screw cap 30 ml,
∅ 25.3 x 98 mm, suitable for 12139, 14031
15032 Polypropylene tube with screw cap 28 ml,
∅ 25.3 x 92 mm, suitable for 12139, 14031
13079 Bottom adapter for 1 tube 40-42 ml 15051,
15052, 15054, suitable for 12151
15049 Polycarbonate tube 50 ml, graduated 0 - 50 ml
in steps of 1 ml, ∅ 34 x 100 mm, suitable for
17950, 14032
15051
Teflon tube with screw cap 42 ml, ∅ 28.5 x 107
mm, suitable for 13079