Sigma 2-16PK - Rotor Graphical Representations

Operating Manual SIGMA 2-16PK page 63 of 77
05/2007
10.1 Graphical Representation of the Rotors
The graphical representation of the rotors shows the maximum and minimum
radii of the accessories used. If necessary, the values must be manually
calculated (see
11.1.1 “RCF”, page 64).
Fig. 10.3: Microhematocrite
rotor
Fig. 10.1: Minimum and
maximum radius of a
swing-out rotor
Fig. 10.2: Minimum and
maximum radius of
an angle rotor