Sigma 2-16PK - Page 9

Operating Manual SIGMA 2-16PK page 9 of 77
05/2007
5.3.3 Relative Centrifugal Force (RCF) 39
5.3.3.1 Changing the RCF Increments 39
5.3.4 Temperature 40
5.3.4.1 Precooling 41
5.3.5 Rotor Preselection 42
5.3.6 Program 43
5.3.6.1 Saving the Current Settings 43
5.3.6.2 Calling Up Stored Programs 43
5.3.7 Lockdown 44
5.3.7.1 Permanent Lockdown 44
5.3.8 Activating/Deactivating the Automatic Lid Opening Function 45
5.3.9 Activating/Deactivating the Sound Signal 45
6 Malfunctions and Error Correction 46
6.1 Error Mode 46
6.2 Error Correction 46
6.2.1 No Indication on the Display 46
6.2.2 Centrifuge cannot be started 46
6.2.3 Centrifuge decelerates during Operation 46
6.2.4 Lid cannot be opened 47
6.2.5 Temperature value cannot be reached 47
6.2.6 Emergency Lid Release 47
6.2.7 Error Codes 48
6.2.8 Service Contact 48
7 Care and Maintenance 49
7.1 Cleaning and Care 49
7.1.1 Centrifuge 49
7.1.2 Accessories 50
7.1.2.1 Plastic Accessories 50
7.1.2.2 Aluminum Accessories 50
7.1.3 Rotors, Buckets, and Multiple Carriers 51
7.1.3.1 Microhematocrite Rotor 51
7.1.4 Load-bearing Bolts 52
7.1.5 Glass Breakage 52
7.1.6 Condenser 53
7.2 Sterilization and Disinfection of the Rotor Chamber and Accessories 53
7.2.1 Autoclaving 54