Sigma 2-5 - Page 11

Operating Manual SIGMA 2-5, page 11 of 55
03/06
1.2 Accessories Suitable for SIGMA 2-5
Part No. Description Max. speed
(rpm)
Max.
gravitational
field (x g)
11031 Swing-out rotor 16 x 15 ml, complete,
consisting of rotor 11030, 4 carriers 13020
and 16 polystyrene tubes 15020, max.
radius 13.6 cm, min. radius 5 cm 4 000 2 433
11032 Swing-out rotor 4 x 100 ml, complete,
consisting of rotor 11030, 4 buckets 13099
and 4 glass tubes 15100, max. radius
13.4 cm, min. radius 5 cm 4 000 2 397
11030 Swing-out rotor for 4 buckets or carriers
13020, 13031, 13033, 13034, 13035, 13038,
13099
11035 Swing-out rotor 8 x 15 ml, complete,
consisting of rotor 11036, 2 carriers 13020
and 8 polystyrene tubes 15020, for tubes
max. ∅
∅∅
∅ 17 x 100 mm, e.g. Monovettes, max.
radius 13.4 cm, min. radius 3.7 cm
4 000 2 397
11036 Swing-out rotor for 2 buckets or carriers
13020, 13031, 13033, 13034, 13035, 13038,
13099
13020 Multiple carrier for 4 round or conical tubes
15 ml, max. ∅
∅∅
∅ 17 x 90 - 110 mm, e.g. 15015,
15020, 15022, 15023, 15024, Monovettes,
suitable for 11030, 11032, 11036,
polyallomer
17907 Adapter for 1 glass tube 6 ml, e.g. 15007,
15027 or 1 Monovette 4.5 ml ∅
∅∅
∅ 11 x
108 mm, suitable for 13020
13035 Multiple carrier for 4 round or conical tubes
5-15 ml, max. ∅
∅∅
∅ 17 x 80 - 110 mm, e.g.
15000, 15010, 15015, 15020, 15022, 15023,
15024, 15039, Monovettes, suitable for
11030, 11031, 11032, 11035, 11036,
polyallomer