Sigma 2-5 - Unpacking of the Centrifuge; Transport Safety Device

Operating Manual SIGMA 2-5, page 24 of 55
03/06
3.1 Unpacking of the Centrifuge
Open cardboard. Take out the box containing accessories. Remove upper foam
cushions. Lift centrifuge upwards with a lifting device or with several persons.
When lifting or carrying the centrifuge please always reach under the instrument
from the side.
Attention: The instrument is heavy!
Please keep case for possible transport of centrifuge later.
3.1.1 Transport Safety Device
The SIGMA 2-5 has a transport safety device which must be removed before
start-up.
Procedure:
Remove the foamed plastic ring from the centrifuge chamber.
The transport safety device should be kept for possible transport of the centrifuge
(service, repair).