Sigma 2-5 User Manual

Operating Manual SIGMA 2-5, page 7 of 55
03/06
General Information
1.1 Technical data
1.2 Suitable accessories
1.3 Scope of supply
1.4 Standards and regulations
1.5 Safety instructions
1.6 Symbol table
Description of the Centrifuge
2.1 General outlay
2.2 Construction and constructive safety measures
2.3 Drive
2.4 Operation and display
2.5 Electronics
2.6 Safety devices
2.6.1 Lid lock, cover closing device
2.6.2 Standstill monitoring
2.6.3 System check
2.6.4 Ground wire check
2.6.5 Option: Imbalance monitoring system
Installation and Start-up
3.1 Unpacking of the centrifuge
3.1.1 Transport safety device
3.2 Installation
3.2.1 Site
3.2.2 Connection
3.2.3 Fuses / emergency circuit breaker on site
3.3 Installation of rotors and accessories
3.4 Initial start-up
3.4.1 Switching on of the centrifuge
3.4.2 Opening lid
3.4.3 Installation of an angle rotor and a swing-out rotor
Operating Elements
4.1 Operating panel
4.1.1 Start-key
4.1.2 Stop-key with soft and softstop function
4.1.3 Lid-key
4.1.4 Knobs

Sigma 2-5 Specifications

General

Brand	Sigma
Model	2-5
Category	Laboratory Equipment
Language	English