Sigma 2-5 - Page 37

Operating Manual SIGMA 2-5, page 37 of 55
03/06
4.2.3.2.1 Short-Run 1
Press the Start-key for the whole short-run. The centrifuge accelerates with
maximum power to the maximum speed (3900 rpm). After release of the Start-
key the centrifuge decelerates with maximum power to standstill.
During short-run the time is counted up in seconds, "sec" is displayed.
A sequence of bars is indicating the elapsed run time. One single bar at "short
run" indicates that short-time operation had been selected. A flashing bar
indicates the maximum speed.
After termination of the short-run the elapsed run time in seconds remains on the
display.