Sigma 2-6E - Page 53

Version 04/2008, Rev. 1.18 of 07/06/2012 page 53 of 65
Translation of the original operating manual
Part no.
Description
Max. speed
(rpm)
Max.
gravitational
field (x g)
12012 Angle rotor 8 x 15 ml complete, incl. 4 sets buckets no.
13011, for tubes Ø 17 x - 115 mm, e.g. no. 15015, 15020,
15023, 15024 and for 8 reaction vials 1.5/2.0 ml no. 15008,
15040,
max. radius 9.6 cm, min. radius 3 cm (with 100 mm tube
length), angle 35°
3 900 1 649
12061 Angle rotor 30 x 15 ml complete, incl. 15 sets buckets no.
13011, for tubes Ø 17 x up to 120 mm, e.g. no. 15015,
15020, 15023, 15024, Monovettes and culture tubes 15 ml
no. 15115, angle 33°,
max. radius 13.9 cm, min. radius 7.8 cm,
max. radius 11.6 cm, min. radius 5.8 cm
Warning!
This rotor may heat up to more than +15°C during long runs
of more than 15 minutes or repeated runs at short intervals!
3 900
3 900
2 364
1 973
12062 Angle rotor 20 x 15 ml complete, incl. 10 sets buckets no.
13011, for tubes Ø 17 x up to 120 mm, e.g. tubes no.
15015, 15020, 15023, 15024, Monovettes and culture tubes
15 ml no. 15115, angle 33°
max. radius 13.9 cm, min. radius 7.8 cm
Warning!
This rotor may heat up to more than +15°C during long runs
of more than 15 minutes or repeated runs at short intervals!
3 900 2 364
Adapters, plastic vessels, and glass tubes
Part no.
Description
13021 Adapter for PCR-tube 0.2 ml, e.g no. 15042, 1 set = 2 pcs., suitable for 12011, 12012
13000 Adapter for reaction vials 0.25/0.4 ml no. 15014, 1 set = 2 pcs., suitable for 12011, 12012
13002 Adapter for reaction vials 0.5/0.75 ml, Ø 7.9/10 x 28/31 mm, e.g. no. 15005,
1 set = 2 pcs., suitable for 12011, 12012, polyallomer
15014 Reaction vials made of polypropylene 0.4 ml, 100 pcs. per pack, suitable for 13000
15005 Reaction vials 0.5 ml, 100 pcs. per pack, suitable for 13002
15008 Reaction vials 1.5 ml, 100 pcs. per pack,
suitable for 12011, 12012
15040 Reaction vials 2.0 ml, 100 pcs. per pack, suitable for 12011, 12012
15060 Polystyrene tube 5 ml (RIA), Ø 12 x 75 mm, suitable for 13033, 14033
15007 Centrifuge glass tube 6 ml, max. 4.000 x g, Ø 12 x 100 mm, suitable for 14029
15027 Centrifuge glass tube 7 ml, max. 4.000 x g, Ø 12 x 100 mm, graduated 1 up to 7 ml
in 0.5 ml increments, suitable for 14029
15015 Centrifuge glass tube 10 - 12 ml, max. 4.000 x g, Ø 16 x 100 mm, suitable for 12011,
12012, 12061, 12062, 13035, 13037, 14030