Sigma 3-16K - Page 16

Operating Manual SIGMA 3-16K, page 16 of 69
03/06
Part No. Description Max. speed
(rpm)
Max.
gravitational
field (x g)
17347 Round carrier for 1 bottle with screw cap
250 ml, max. ∅
∅∅
∅ 61.5 x 90 - 125 mm, e.g.
15247, 15248, 15249, polypropylene
11240 Swing-out rotor for microtiter-plates, incl. 2
buckets 13145 and plate holder 17977,
radius edge 12.7 cm,
radius max. 10.5 cm
radius min. 4.65 cm,
max. plate height 64 mm
3 850 2 105
1 740
770
11222 Swing-out rotor for microtiter plates, incl. 2
carriers 13222
radius edge 12.3 cm,
radius max. 10.5 cm,
radius min. 6.5 cm
max. plate height 56 mm
3 000 1 238
1 057
654
11133 Swing-out rotor for 4 round buckets, for the
following accessories: 5 500 5 445
13104 Round bucket, aluminium, sealable with
caps 17109, 17111, for the following round
carriers and the 200 ml bottles 15202 and
15203, suitable for 11133, max. radius
16.1 cm, min. radius 5.7 cm: 5 500 5 445
17109 Sealing cap, aluminium, for hermetic
sealing of bucket 13104
17111 Sealing cap, polysulfone, clear, for
hermetic sealing of bucket 13104
13117 Round bucket, aluminium, for the following
round carriers and the 200 ml bottles 15202
and 15203, suitable for 11133, max. radius
16.1 cm, min. radius 5.7 cm 5 500 5 445
17000 Round carrier, two-piece, undrilled, for
tubes 90 - 110 mm long, polyallomer
17006
Round carrier for 12 tubes 5 ml, max. ∅
∅∅
∅
12.5 x 55 - 75 mm, e.g. hemolyse tubes or
RIA-tubes 15060, polyallomer